Product Introduction
This ODF computerized coating tester adopts a flatbed design and is equipped with the Annimet Testing Control System V1.0, with all operations set via a touchscreen. Coating is performed by an adjustable blade in a direct-push mode. The blade is connected to the base in a split-type design with a 2-in-1 multifunctional connector, and its thickness is digitally adjusted with a display accuracy of 0.001 mm, covering the full range of 10 to 3000 μm, with other thicknesses available on request. The specimen is held by mechanical clamps, with an optional vacuum adsorption system suitable for copper foil, aluminum foil, plastic sheets, glass, and other substrates that cannot be laid flat independently. The vacuum platform is made of quenched and mirror-ground mold steel, with adsorption hole diameters of 1.0 mm or 0.8 mm, paired with an external water-circulation vacuum pump. For drying, an optional upper infrared heating module combines infrared and hot air at 800 W, with a settable temperature range from room temperature to 100°C and uniformity of ±2.5°C. The machine measures 450×350×350 mm, operates on 220V/50Hz with a main power of 180W, and fits easily on a laboratory bench.

Key Features 
Purpose-Built for ODF：Optimized for orally dissolving film solutions, coating the prepared solution into a uniform wet film that becomes a single-sheet ODF after heating.
Precision Adjustable Blade：Blade thickness adjustable from 10 to 3000 μm with 0.001 mm digital display accuracy, made of imported stainless steel with straightness within ±0.0025 mm.
Stable Flatbed Drive：Dual slide rails combined with ball screw and timing belt drive deliver smooth, repeatable coating at speeds freely settable from 1 to 2000 mm/min.
Vacuum Adsorption Platform：Quenched and mirror-ground mold steel platform with ±2.5 μm flatness; vacuum adsorption holds copper foil, aluminum foil, plastic sheets, glass, and other substrates.
Infrared Heating & Setting：Optional upper infrared heating module combining infrared and hot air at 800 W, settable from room temperature to 100°C with ±2.5°C uniformity for rapid film setting or drying.
Touchscreen Intelligent Control：Equipped with the Annimet Testing Control System V1.0, offering intuitive parameter setting and precise control via touchscreen.
Medical-Grade Stainless Steel Housing：The entire housing is made of 304 stainless steel, offering corrosion resistance, easy cleaning, and compliance with laboratory hygiene requirements.
Flexible Optional Expansion：Effective coating area can be upgraded to 300×400 mm, and automatic liquid feeding is available as an option to suit different R&D stages.

Technical Specifications 

FAQ 
Q: What products is this coating tester mainly used for?
A: It is mainly used for laboratory single-sheet coating and sampling of orally dissolving films (ODF), coating the prepared film solution into a wet film that is then heated and dried into a single-sheet ODF.
Q: Can the coating thickness be adjusted? What is the accuracy?
A: Yes. The blade thickness is adjustable from 10 to 3000 μm with a digital display accuracy of 0.001 mm; other thicknesses can be customized.
Q: How is the substrate fixed on the platform?
A: The platform uses vacuum adsorption, suitable for copper foil, aluminum foil, plastic sheets, glass, and other substrates that cannot be laid flat independently. Mechanical clamps are also available.
Q: Does the machine have a heating and drying function?
A: An optional upper infrared heating module is available, combining infrared and hot air at 800 W, with a settable temperature range from room temperature to 100°C and ±2.5°C uniformity.
Q: Can the coating speed be set?
A: Yes. The coating speed is freely settable from 1 to 2000 mm/min via the touchscreen, ensuring smooth operation.
Q: What is the effective coating size? Can a larger size be customized?
A: The standard effective coating area is 200×300 mm, with an optional 300×400 mm size to accommodate different sample requirements.

After-Sales Service 
Thank you for your interest. Shandong Annimet Instruments Co., Ltd., founded in 2007, has been committed to the R&D, manufacturing and sales of quality testing instruments. Throughout our development, we have treated product quality as the lifeline of our enterprise and relentlessly pursued perfection in every instrument we build. Looking at the history of science and technology, we firmly believe that every product relies on the advancement of technology, every technological breakthrough originates from material exploration, every material discovery depends on process improvement, and every process improvement is supported by experimental means. Human creativity never falls short of ideas—what we need are tools to realize them. Annimet Instruments will continue to provide the means to bring your ideas and innovations to life. Should you have any questions, please feel free to contact our customer service team; we are fully dedicated to providing excellent pre-sale, in-sale and after-sale support.

Shandong Annimet Instruments Co., Ltd.
Address: Building 105, No.155, Xinmao Qilu Technology City, Zidong Avenue 299, Tianqiao District, Jinan City, Shandong Province, 250032, China
Tel: +86-400-9933-057 Fax: +86-531-88092218
Web: http://www.sdanmtyq.com E-mail: anmt_test@126.com